COMPUMARINE
Cedar Strip Small Craft Designs
Since 1989
260 Camino Apolena
Rio Rico AZ 85648-1028
Bus: 520-604-6700
Fax: 520-377-2900
Res: 520-281-2901

Email: 
johnc@compumarine.com

Compumarine has moved from
Everett, WA to Rio Rico, AZ!!!


Home
Up
Page 32 

 

Page 31

Photo Manual

Compumarine Boat Plans
Cedar Strip Small Craft Construction

When making filled epoxy be sure to mix the resin and hardener for about two minutes before stirring in the wood dough. After the wood dough filled epoxy is thoroughly mixed, spread it out thin on a piece of plywood to keep it from setting up too quickly.

Install seat stringers on each side of the hull for the thwarts to rest on. The stringers don't have to be full length. I don't like to have screws penetrating strip hulls because I feel they detract from the looks, so I improvise methods of clamping as you can see in this photo. Use filled epoxy to install the stringers.

Back    Next

|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|
|16|17|18|19|20|21|22|23|24|25|26|27|28|
|29|30|31|32|33|34|35|36|37|38|39|40|41|

| Home | Boat Plans | Boats | About Us | How To | Contact Us | Privacy Statement | Links | Completed Boats |
| The Classic Dinghy | The Power Dinghy | The Yacht Tender | The Fisherman | The Classic Canoe |

This Web Site is maintained by John R Clark, JRC Web Design,  
Last updated March 6, 2008

Copyright 1989 - 2008 © Compumarine, All Rights Reserved