Page 5

Photo Manual

Compumarine Boat Plans
Cedar Strip Small Craft Construction

This set of molds for the Classic Dinghy has also been cut out of plywood. This photo shows the finished molds from a different perspective.

This set of molds for the Fisherman hull were cut out of 1/2" Strand board. Be sure to give the cut out edges of the molds at least two coats of epoxy. The epoxy strengthens the end grain of either plywood or Strand board to help it hold nails or staples better.  Strand board is an excellent material for station molds.  It is inexpensive and it is fairly dense and holds nails very well.

Back    Next

|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|
|16|17|18|19|20|21|22|23|24|25|26|27|28|
|29|30|31|32|33|34|35|36|37|38|39|40|41|

| Home | Boat Plans | Boats | About Us | How To | Contact Us | Privacy Statement | Links | Completed Boats |
| The Classic Dinghy | The Power Dinghy | The Yacht Tender | The Fisherman | The Classic Canoe |

This Web Site is maintained by John R Clark, JRC Web Design,  
Last updated October 29, 2009

Copyright 1989 - 2008 © Compumarine, All Rights Reserved