Page 8

Photo Manual

Compumarine Boat Plans
Cedar Strip Small Craft Construction

The first strip you will install on the molds is the keel strip. Attach the keel strip across the top of the station molds on the centerline. Measure the distance at the top as you nail the strip to the molds. Make sure that you have the correct station spacing at the top of the molds. The spacing at the top should be the same as at the bottom.

The next strips to be attached are the sheerline strips on each side of the molds. Start attaching the sheerline strip at Station 5 exactly at the notch in the molds and work towards each end of the hull. Be sure to keep the station spacing accurate as you attach the strip to each of the molds.

Back    Next

|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|
|16|17|18|19|20|21|22|23|24|25|26|27|28|
|29|30|31|32|33|34|35|36|37|38|39|40|41|

| Home | Boat Plans | Boats | About Us | How To | Contact Us | Privacy Statement | Links | Completed Boats |
| The Classic Dinghy | The Power Dinghy | The Yacht Tender | The Fisherman | The Classic Canoe |

This Web Site is maintained by John R Clark, JRC Web Design,  
Last updated September 15, 2011

Copyright 1989 - 2008 © Compumarine, All Rights Reserved